Product Name : Deadpool Car Decal Sticker Car Window Windshield Decal Sticker

Color: Silver White
Dimensions: 21×44.5cm
Packing: opp bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die-cut sticker
(The background WILL NOT be part of the sticker!)

Deadpool Car Decal

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Subiegang Windshield Decal
Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

Deadpool Car Decal Deadpool Car Decal Deadpool Car Decal Deadpool Car Decal Deadpool Car Decal

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name :PARODY sexy VW sticker For Volkswage Jetta VW Polo Golf WAGONS passat Car Styling

Color: Black / Silver White
Dimensions: 12cm x 12cm
Packing: OPP bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

sexy VW sticker

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

sexy VW sticker sexy VW sticker sexy VW sticker sexy VW sticker sexy VW sticker

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name : Volkswagen Rabbit Stickers for VW Golf POLO GTI VW MK1 MK2 MK3 MK4

Color: Black / Silver White
Dimensions: 10.6cm x 12cm
Packing: OPP bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

Volkswagen Rabbit Stickers

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

Volkswagen Rabbit Stickers Volkswagen Rabbit Stickers Volkswagen Rabbit Stickers Volkswagen Rabbit Stickers Volkswagen Rabbit Stickers

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name : No Fear bad boy angry eyes sticker vinyl Car Body Window Decal waterproof reflective

Color: Black / Silver White
Dimensions: 14cm x 9cm
Packing: OPP bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

angry eyes sticker

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

angry eyes sticker  angry eyes sticker angry eyes sticker angry eyes sticker angry eyes sticker

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name : Racing Volkswagen Stickers Lights Brow Waterproof Reflective Universal Vehicle Decals

Color: Black / Silver White
Dimensions: 35cm x 7.7cm / 35cm x 13.3cm
Packing: OPP bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

Volkswagen Stickers

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

Volkswagen Stickers Volkswagen Stickers Volkswagen Stickers Volkswagen Stickers Volkswagen Stickers

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name :

Color: Black / Silver White
Dimensions: 25cm x 9cm
Packing: OPP bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

TRD Windshield Decal

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name :

Color: Silver White
Material: Outdoor reflective stickers
Dimensions: 58cm x 13.7cm
Packing: OPP bag
Applicable models: General
Scope: Car window Windshield
Quantity: individually wrapped a dress
Production process: die cut sticker

TRD Windshield Decal

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name :

Colors: Black / Silver White
Size: as the pictures show
Packing: opp bag
Material: PVC reflective
Suitable place: anywhere
Unit package includes: 1set

TRD Windshield Decal

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name :

Material: Outdoor reflective stickers
Color: Reflective silver white
Dimensions: 57×17.9cm
Packing: OPP bag
Applicable models: General
Scope: car window
Quantity: individually wrapped a dress
Production process: die cut sticker

TRD Windshield Decal

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Material: Outdoor reflective stickers
Color: Reflective silver white
Dimensions: 15cm x 5cm / 43cm X14cm
Packing: OPP bag
Applicable models: General
Scope: car window
Quantity: individually wrapped a dress
Production process: die cut sticker

TRD Windshield Decal

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal TRD Windshield Decal

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％