This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to the most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Subiegang Windshield Decal
Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, removing the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel it off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

％BLOGLINK％
％POSTLINK％

Product Name: 2PCS 2 Color England Flag Sticker For Car No Background Reflective

Color: Silver White / Black
Dimensions: 15 x 9cm
Packing: opp bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die-cut sticker
(The background WILL NOT be part of the sticker!)

England Flag Sticker

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

England Flag Sticker

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

％BLOGLINK％
％POSTLINK％

Product Name : Thick Thighs Take Lives Sexy Decal Sticker

Color: Silver White / Black
Dimensions: 22x8cm
Packing: opp bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die-cut sticker
(The background WILL NOT be part of the sticker!)

Sexy Decal Sticker

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Subiegang Windshield Decal
Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

Sexy Decal Sticker Sexy Decal Sticker Sexy Decal Sticker Sexy Decal Sticker Sexy Decal Sticker

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name : Don’t touch me car decals sticker

Color: Silver White / Black
Dimensions: 15×4.4cm / 23×6.7cm
Packing: opp bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die-cut sticker
(The background WILL NOT be part of the sticker!)

Don’t touch

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Subiegang Windshield Decal
Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

Don’t touch Don’t touch Don’t touch Don’t touch Don’t touch

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name : No F*cks Given JDM Car Decals Tuner Sticker

Color: Black / Silver White
Dimensions: 20x11cm
Packing: opp bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

JDM Car Decals

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

JDM Car Decals

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

JDM Car Decals JDM Car Decals JDM Car Decals JDM Car Decals JDM Car Decals

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name : Look Only! No touch! JDM Wave Tuner Car Vinyl Drift Decal Sticker for Car Truck Window Laptop Die Cut

Color: Black / Silver White
Dimensions: 15×12.5cm
Packing: opp bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

JDM Wave Tuner

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

JDM Wave Tuner JDM Wave Tuner JDM Wave Tuner JDM Wave Tuner JDM Wave Tuner

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name :Black Lives Matter Sticker BLM Decal waterproof reflective universal car body sticker black and silver-white

Color: Black / Silver White
Dimensions: 15×9.4cm
Packing: opp bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

Black Lives Matter Sticker

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

Black Lives Matter Sticker Black Lives Matter Sticker Black Lives Matter Sticker Black Lives Matter Sticker Black Lives Matter Sticker

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name : BLM Sticker waterproof reflective car motorcycle sticker black and silver-white

Color: Black / Silver White
Dimensions: 11x11cm
Packing: opp bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

BLM Sticker

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

BLM Sticker BLM Sticker BLM Sticker BLM Sticker BLM Sticker

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name : Black Lives Matter Decal waterproof reflective universal car body sticker black and silver white

Color: Black / Silver White 
Dimensions: 11x11cm
Packing: opp bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

Black Lives Matter Decal

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

Black Lives Matter Decal Black Lives Matter Decal Black Lives Matter Decal Black Lives Matter Decal Black Lives Matter Decal

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name :PARODY sexy VW sticker For Volkswage Jetta VW Polo Golf WAGONS passat Car Styling

Color: Black / Silver White
Dimensions: 12cm x 12cm
Packing: OPP bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

sexy VW sticker

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

sexy VW sticker sexy VW sticker sexy VW sticker sexy VW sticker sexy VW sticker

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％