2 Color To Choose Waterproof Reflective Die Cut Vinyl Decal Car Styling Classic Wankel Engine Mazda Car Stickers for Mazda Rx-7 Car Accessories.

Color: Reflective Silver White / Black
Type: Universal Car Sticker
Decal Size: 12 x 11.7cm
Material: High-quality reflective PET Material
Useful Life: 3~5 years Package
Included: 1 piece

Clean the surface and make sure it’s dry before using the decal. No washing within 72hours.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film. Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface. They will stick to the most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe. This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film. It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. Subiegang Windshield Decal

Attention: The picture is for reference only, the actual item is the standard. This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands sticking your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel it off. From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat. Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hairdryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE ** Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors. After shipping, You can track it on our Website. also, you can track it on 17track.

％BLOGLINK％
％POSTLINK％

Product Name : 2type 1pair MAZDASPEED side door Decal Sticker

mazdaspeed side door decal sticker

Color: Black / Silver White
Size: 50cm-90cm
Packing: OPP bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

MAZDASPEED side door Decal Sticker

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

MAZDASPEED side door Decal Sticker MAZDASPEED side door Decal Sticker MAZDASPEED side door Decal Sticker MAZDASPEED side door Decal Sticker MAZDASPEED side door Decal Sticker

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name : MAZDASPEED Fuel Tank Decal Sticker for mazda 3 6 rx7 rx8 cx-5 323 626 cx-7 cx-9 mz3 mx-5

Color: Black / Silver White
Dimensions: 12cm x 10cm
Packing: OPP bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

MAZDASPEED Fuel Tank Decal Sticker MAZDASPEED Fuel Tank Decal Sticker

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

MAZDASPEED Fuel Tank Decal Sticker MAZDASPEED Fuel Tank Decal Sticker MAZDASPEED Fuel Tank Decal Sticker MAZDASPEED Fuel Tank Decal Sticker MAZDASPEED Fuel Tank Decal Sticker MAZDASPEED Fuel Tank Decal Sticker

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name : Mazdaspeed JDM Japanese Decal Stickers JDM Styling for Mazda

Color: Black / Silver White
Dimensions: 15cm / 35cm / 50cm / 70cm
Packing: OPP bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

Mazdaspeed JDM Japanese Decal Stickers

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

Mazdaspeed JDM Japanese Mazdaspeed JDM Japanese Mazdaspeed JDM Japanese Mazdaspeed JDM Japanese Mazdaspeed JDM Japanese

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name : Mazda M logo 1960’s nostalgia Vehicle Decals Stickers for Mazda car

Color: Black / Silver White
Dimensions: 12cm x 12cm
Packing: OPP bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

Mazda M logo

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

Mazda M logo Mazda M logo Mazda M logo Mazda M logo Mazda M logo

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name : Mazda Jdm Japanese Kanji Universal Vehicle Decals

Color: Black / Silver White 
Dimensions: 15cm / 35cm / 50cm / 70cm
Packing: OPP bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker

Mazda Jdm Mazda Jdm

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

Mazda Jdm Mazda Jdm Mazda Jdm Mazda Jdm

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％

Product Name : JDM Initial D Sticker Japanese Kanji Drift Universal Vehicle Decals

Color: Black / Silver White
Dimensions: 35cm x 4cm / 50cm x 6cm / 75cm x 9cm / 90cm x 10.7cm
Packing: OPP bag
Applicable models: General
Scope: Car window / Car body
Quantity: individually wrapped a dress
Production process: die cut sticker
Package:1 Pair (Left & Right)

Initial D Sticker

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

Our die-cut decals are made from 5-7 year outdoor vinyl and will last for many years indoors as well. The decals are easy to apply but are not repositionable once applied. The decal can be applied to any smooth surface. The surface should always be cleaned thoroughly before applying to ensure better adherence to the surface.

They will stick to most smooth surfaces. It can not only suitable for outdoor applications: car body, car window, and car door, but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure. These decals are not dishwasher or microwave safe.

This product is composed of three parts. The upper layer is a transparent transfer film, the middle layer is the main body, the bottom is the bottom film.

It can not only be pasted on your car body, car window, and car door but also on the wall, laptop, skateboard, refrigerator as well. It helps to provide a high level of visibility and demonstrate your special taste, value, and interest. Water-proof and sun-proof, its color remains unchanged after long sun exposure.

Attention :
The picture is for reference only, the actual item is the standard.
This is not a window cling or printed decal. It does not have a background, thus a different installation process is required. Please refer to the following instructions.

Detailed Car Decal Installation Instructions
Small Decal Installation: This can be done by removing the backing layer, then, holding the transfer and vinyl layers with both hands stick your decal to your desired spot, then after rubbing over it with a card or squeegee, remove the transfer layer. All that should remain on your surface is the die-cut car decal.

Larger Decal Installation: We recommend a friend or masking tape to assist you. With the backing paper still on, affix your decal into your desired position by putting masking tape along the length of an edge of your decal. This becomes a hinge. Flip the decal over along this hinge. Carefully peel off the backing paper entirely. Now lift the end of the transfer layer (opposite the hinge) with one hand, while using a card or squeegee with your other hand to rub the decal firmly onto your surface. Then remove the transfer layer and enjoy it. All that should remain on your surface is the die-cut car decal.

Car Decal Removal
From Glass: Use a razor blade or scraper (metal or plastic) to lift an edge of the vinyl until you can grab it with your fingers and peel off.
From Vehicle Body: Use a plastic razorblade or scraper so you don’t scratch your clear coat.
Tips: For stubbornly stuck vinyl, heat mildly with a heat gun or hair dryer, then use the above methods.

** CUSTOM DECALS ALWAYS AVAILABLE **
Don’t see what you are looking for? Feel free to contact us. Send us a message, we can make decals of almost any design in a variety of sizes and colors.

After shipping, You can track it on our Website. also, you can track it on 17track.

Initial D Sticker Initial D Sticker Initial D Sticker Initial D Sticker Initial D Sticker

COLOR CHART

Pure White Matte

Reflective White Glossy

Dark Gray Matte

Black Glossy

Reflective Blue
Glossy

Reflective Yellow
Glossy

Reflective Red
Glossy

Chrome Laser Glossy

％BLOGLINK％
％POSTLINK％